Designed for insulating flat roofs, these 120mm thick Kingspan Thermaroof TR27 PIR Flat Roof Insulation Boards feature a high-performance, fibre-free, rigid thermoset insulation core with a coating of glass tissue on both sides. Easy to handle and install compared to some othe... Read More
SUPER rewards Earn points and save £££ on our SUPERSTORES
Find out morePay in 3 interest-free payments of £0.00
Learn moreDesigned for insulating flat roofs, these 120mm thick Kingspan Thermaroof TR27 PIR Flat Roof Insulation Boards feature a high-performance, fibre-free, rigid thermoset insulation core with a coating of glass tissue on both sides. Easy to handle and install compared to some other commonly used insulants, they are ideal for refurbishment and new build projects.
Completely compatible with most mastic asphalt, bitumen-based, single-ply partially bonded built-up felt and cold liquid-applied waterproofing applications, these Thermaroof Insulation Boards can also be used with most green roof installations. Additionally, they are suitable for use with single-ply non-bituminous membranes that are fully bonded with solvent-based adhesive systems.
This item is non-returnable due to being Special Order, Made to Measure or for hygiene reasons. Your statutory rights are not affected.
Question:
Is this suitable for the exteror as my ceiling eight is low?
Answer:
The Kingspan Thermaroof TR27 Flat Roof Insulation Board is designed for flat roofing applications, which typically means it is suitable for exterior use. However, the specific suitability of this product for your project may depend on other factors including your local climate, the existing construction of your roof, and local building regulations. If you have a low ceiling height, this product could be a good choice as it is relatively thin at 120mm. Nevertheless, it's always a good idea to consult with a builder or architect before undertaking significant building work.
Question:
what is best product to stick to vapour barrier
Answer:
The Kingspan Thermaroof TR27 Flat Roof Insulation Board you're inquiring about is typically used with a range of adhesives suitable for flat roofing applications. However, the choice of adhesive can vary depending on the type of vapour barrier you're using. It's recommended to consult the manufacturer's guidelines for the vapour barrier to ensure compatibility. Our customer service team can also help you find suitable adhesive products we offer. Please ensure that any adhesive used is compatible with both the vapour barrier and the insulation board to ensure optimal performance.
Question:
What is the fire rating?
Answer:
Kingspan TR27 is rated at Euroclass F on the fire classification scale.
Question:
This insulation need to have a ply on top, for Fibreglass roof? or fibre can be done straight to this insulation.
Answer:
This is tissue faced, so fibreglass can be applied directly. It just means that you would need to be very careful if walking on it.
Question:
what s the outer surface of the insulation make of, cardboard/paper or foil
Answer:
Polystyrene and foil backed :)
Question:
Can you put 3 layer felt straight on top of this insulation ???
Answer:
Thermaroof TR27 LPC/FM is a high performance, fibre free, rigid thermoset insulation core faced on both sides with a coated glass tissue facing which is used for insulating flat roofs. Fully compatible with single–ply non–bituminous membranes that are fully bonded with solvent based adhesive systems, most bitumen based and mastic asphalt waterproofing systems and most green roof systems.
Products We Recommend
Product Enquiry Form