Ideal for pitched roofs or ceilings, timber frames or masonry walls, these 105mm thick Actis Hybris Panel Reflective Multifoil Insulation boards provide a total coverage area of 5.49m² and are supplied in a pack of four. Helping to maintain energy efficiency in your home, this ... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
Ideal for pitched roofs or ceilings, timber frames or masonry walls, these 105mm thick Actis Hybris Panel Reflective Multifoil Insulation boards provide a total coverage area of 5.49m² and are supplied in a pack of four.
Helping to maintain energy efficiency in your home, this insulation provides a cost-effective solution, delivering excellent airtightness and thermal performance as well as wind and moisture resistance and high acoustic comfort. It is light in weight and easy to handle and install without any irritating fibres to deal with.
Featuring a unique honeycomb structure that will not compact over time, these Actis Hybris panels include numerous low-emissivity cavities which are protected from excessive dust and air movement. They ensure long-lasting performance and thanks to their flexibility, thermal bridging is practically eliminated.
These panels are created from shaped polyethylene foams bonded to aluminium-coated polyethylene foils. The low-emissivity exterior films also offer extra thermal resistance when coordinated with air cavities.
Question:
Hi would you be able to tell me the u values  can expect to achieve from the Actis hybrid 105mm. I’m planning on using this instead of 100mm pir. Each panel will be 600 wide sloping’ my plan was to use this in between rafters and joists instead of pir then overlay with superfood Â
Answer:
The Actis Hybris Panel Reflective Multifoil Insulation 105mm provides excellent thermal performance, however, the exact U-values may depend on the specific installation scenario and construction arrangement. For detailed information on U-values, I would recommend checking our data sheet for the product which can be found at this link: Actis Hybris Data Sheet. If you need specific advice on replacing PIR insulation with this product, it may be best to consult with a building professional or our technical team to ensure the insulation will meet your requirements. Also, here is the link to the installation guide which could be helpful: Actis Hybris Installation Guide.
Question:
Hi, can these be used to fill ‘skeilings’ sloping ceilings? From the position of sitting in lift and putting down between rafters down to the eaves and soffit position. What can it and can it not do? Has it been used on any pas2035 projects? Best wishes
Answer:
The Actis Hybris Panel Reflective Multifoil Insulation is versatile and can indeed be used for insulating sloping ceilings, or 'skeilings'. It's designed for application in ceilings, walls, and roofs. It's popular for its high performance and easy installation. However, for your specific installation method, you might want to consult the Actis Hybris Installation Guide for detailed instructions. As for your question about PAS2035 projects, I'm afraid I don't have that information at hand. You may wish to contact Actis directly to inquire about their product use in PAS2035 projects. Here are some useful documents you may want to check out: 1. Actis Hybris Installation Guide 2. Actis Hybris Data Sheet 3. Actis Hybris Solution Systems Applications Brochure
Question:
Can this product be used under floorboards
Answer:
The Actis Hybris Panel Reflective Multifoil Insulation is primarily designed for application in ceilings, walls, and roofs. While it's not specifically designed for under floorboard use, it may still function effectively in this context depending on the specifics of your project. However, we would recommend consulting a professional or contacting Actis directly for advice tailored to your specific requirements. More information about this product can be found in the Data Sheet and the Installation Guide.
Question:
Can the product be cut to size?
Answer:
This is easily cut with the Actis cutter, an insulation saw, electric alligator saw or standard hand saw.
Question:
Do you need a thermal barrier gap with this product?
Answer:
It can be in direct contact with building components but the thermal efficiency will be improved with air gaps associated with the product.
Products We Recommend
Product Enquiry Form
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
