Jabfloor insulation can be used in all floor constructions for both domestic and commercial buildings. The application will determine the grade of Jabfloor required for your project. Jabfloor 70 is mainly used for domestic floors, whereas Jabfloor 100 is widely used for commer...Read More
Jabfloor insulation can be used in all floor constructions for both domestic and commercial buildings. The application will determine the grade of Jabfloor required for your project. Jabfloor 70 is mainly used for domestic floors, whereas Jabfloor 100 is widely used for commercial floors where higher loadings are likely to be encountered.
Jabfloor is also available in higher grades up to Jabfloor 250 which may be required in certain specialist industrial and commercial applications.
Jabfloor can be placed above a concrete slab or a pre-cast concrete floor in ground-floor constructions and finished with a wearing layer of chipboard to relevant U-value requirements.
Please note: This product is a white board with a speckled pink and black finish
Jabfloor insulation can be used in all floor constructions for both domestic and commercial buildings, such as below chipboard, below ground supported slab, below screed, below suspended concrete floors and below suspended timber floors.
Permanent
Jabfloor is rot-proof and durable and will remain effective for the life of the building. It also has the added advantage of being flood-proof.
Fire rating
Solid ground floors are not required to provide fire resistance. When properly installed, the EPS insulation is fully protected by the chipboard and will have no adverse effect on the fire performance of the floor. Euroclass E, flame retardant material, is available to order - please contact us on : 01752 692206 if this is a requirement.
Easy to handle
Jabfloor is manufactured from expanded polystyrene (EPS) which is lightweight and easy to handle on site.
Please note, Jabfloor is a building grade material and will not be completely white in appearance.
Length: 2.4m.
Width: 1.2m.
Thickness: 25mm.
Board coverage: 2.88m2.
Thermal conductivity: 0.038 W/mK.
Certification: BBA certified.
There are no product downloads to show.
There are currently no questions for this product.
Pay in 4 interest-free payments of £1.13
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
