Gyproc Fireline backed with a vapour control membrane, which combines a high fire performance lining with vapour control. Used in British Gypsum, partition, wall lining and ceiling systems to give increased fire protection with vapour control. Also used for protection to struc...Read More
Gyproc Fireline backed with a vapour control membrane, which combines a high fire performance lining with vapour control. Used in British Gypsum, partition, wall lining and ceiling systems to give increased fire protection with vapour control. Also used for protection to structural steel.
Gypsum plasterboard with glass fibre and other additives in the core backed with a vapour control layer. Gyproc Fireline duplex consists of an aerated gypsum core with glass fibre and other additives encased in, and firmly bonded to, strong paper liners and backed with a metalised polymer of polyethylene film. Gyproc Fireline duplex is a plasterboard that is suitable for drylining internal surfaces.
This plasterboard is one of the products within our plasterboard range that is certified to BES 6001 achieving a rating of ‘Excellent’.
Length: 2.4m.
Width: 1.2m.
Thickness: 12.5mm.
Weight: 9.8kg/m2.
Fire rating: class 1 both sides - BS 476.
Thermal resistance: 0.39 m²K/W.
Thermal conductivity: 0.24 W/mK.
Face: pink face paper.
Metalised polyester film reverse.
Fixing:
Fix boards with decorative side out to receive joint treatment or a skim plaster finish. Lightly butt boards together. Never force boards into position. Install fixings not closer than 13mm from cut edges and 10mm from bound edges. Position cut edges to internal angles whenever possible, removing paper burrs with fine sandpaper.
Stagger horizontal and vertical board joints between layers by a minimum of 600mm. Locate boards to the centre line of framing where this supports board edges or ends.
Plastering:
The face (pink) of Gyproc Fireline duplex can be plastered with either Thistle BoardFinish or Thistle MultiFinish. There should be the minimum of delay between completion of the lining and the commencing of plastering.
Jointing:
Gyproc jointing materials produce durable joint reinforcement and a smooth, continuous, crack-resistant surface ready for priming and final decoration. A number of jointing specifications are available to suit the board type, method of application, and site preference.
Decoration:
After the joint treatment has dried, decoration, including any decorator’s preparatory work, should follow with the minimum delay.
Cutting:
This product may be cut using a plasterboard saw or by scoring with a sharp knife and snapping the board over a straight edge. Holes for switch or socket boxes should be cut out before the boards are fixed using
There are currently no questions for this product.
Pay in 4 interest-free payments of £4.2525
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
