The latest addition to the Gyproc performance board range. Designed for use in the residential sector, Gyproc Habito provides enhanced impact resistance and for the first time, fixing capability. Suitable for direct decoration or a Thistle plaster finish. This product is part...Read More
The latest addition to the Gyproc performance board range. Designed for use in the residential sector, Gyproc Habito provides enhanced impact resistance and for the first time, fixing capability. Suitable for direct decoration or a Thistle plaster finish.
This product is part of our Rooms Made For You range; designed to appeal to the consumer to improve their living spaces.
Designed for use in British Gypsum wall and partitions systems where greater levels of impact/duty and fixing capability are required.
Length: 2.4m.
Width: 1.2m.
Thickness: 12.5mm.
Weight: 12kg/m2.
Fire rating: class 0 to EN 13501-1.
Thermal resistance: 0.07 m²K/W.
Thermal conductivity: 0.25 W/mK.
Face: ivory coloured paper.
Brown reverse side paper.
Edging: tapered edge.
Fix boards with decorative side out to receive joint treatment or a skim plaster finish. Lightly butt boards together. Never force boards into position. Install fixings not closer than 13mm from cut edges and 10mm from bound edges. Position cut edges to internal angles whenever possible, removing paper burrs with
fine sandpaper. Stagger horizontal and vertical board joints between layers by a minimum of 600mm. Locate boards to the centre line of framing where this supports board edges or ends.
The face (ivory) of Gyproc Habito can be plastered with either Thistle BoardFinish, Thistle MultiFinish, Thistle DuraFinish or Thistle SprayFinish plasters. There should be the minimum of delay between completion of the lining and the commencement of plastering.
Gyproc jointing materials produce durable joint reinforcement and a smooth, continuous, crack-resistant surface ready for priming and final decoration. A number of jointing specifications are available to suit the board type, method of application, and site preference.
After the joint treatment has dried, decoration, including any decorator’s preparatory work, should follow with the minimum delay.
This product may be cut using a plasterboard saw or by scoring with a sharp knife and snapping the board over a straight edge. Holes for switch or socket boxes should be cut out before the boards are fixed using a utility saw or sharp knife. When cutting boards, power and hand tools should be used with care and in accordance with the manufacturers’ recommendations. Power tools should only be used by people who have been instructed and trained to use them safely. Appropriate personal protective equipment should be used.
There are currently no questions for this product.
Pay in 4 interest-free payments of £7.27
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
